Cordless Keyboard Issues

The software giant Microsoft not only develops operating systems, but also manufactures computer peripherals like keyboards and mice. These peripherals can be either corded, which means they connect to the system through USB or PS2 cables, while others are wireless. Microsoft peripherals work great on Microsoft operating systems; however, they are prone to suffer from certain issues.

Here are some peripheral related Microsoft problems you may encounter while working and ways of fixing them:

• Synchronization – The cordless keyboard by Microsoft is connected to the central system through the Microsoft wireless hub. The keyboard performs transmission to the hub wirelessly, and hence requires being in synchronization with it. However, both devices are designed to operate at multiple transmission frequencies. This is done as so that there is no interference from other devices working in the same frequency band. If proper communication does not exist between the keyboard and the hub, resynchronize both devices to the same frequency immediately. The directions to resynchronize the devices are available on the device packaging.

• Port Issues – The line communication from your wireless keyboard to the system is through the wireless hub, which is typically attached to a USB plug. A faulty or damaged USB plug can hinder proper communication. In this case just move the wireless USB hub to a different USB plug to remove the communication problem.

• Batteries – If the wireless keyboard is running on old batteries, then there are chances that the data is sent in an intermittent fashion. This same effect can be noticed if you place fresh batteries in an improper manner. The best option is to install fresh batteries or re-seat existing batteries in a proper manner.

• Interference – Both the cordless and USB hubs work on a set of radio frequencies for communication. However, this makes them prone to interference from nearby electronic devices which are operating in the same frequency range. They are also prone to interruption from metal objects in the vicinity of the wireless devices. Relocate the metal objects from the workspace and check for any device that is causing such interference. Check for other wireless devices like Smartphones or tablets, or other USB hubs that could be nearby.

Wireless devices are very easy, as you do not have to be seated right next to the system to work. If you still encounter Microsoft problems with your wireless devices, check up on a help option in Control Panel, or contact Microsoft tech support.

How To Fix Windows Installer Error 1603

Error 1603 can be annoying especially when you are just a few steps away from setting up your new software. Follow the simple guidelines briefed below to fix the Installer Error 1603.

Instructions for fixing Microsoft problems

Removing the error 1603 problem

·         Make sure that you do not install the new software code in the substitute drive. Installing the software in the substitute drive can make your system display the error 1603.

·         Do not install your software code in an encrypted folder or location. Most encrypted folder locations will accept or allow the proper installation of the software. They can often make your system display the error message.

·         Place a tick mark in the box next to the label that reads Grant full access to the System account so that you install the software with much ease. Navigate into the System account settings page. To launch the system account settings page, launch the My Computer window page.

·         Navigate into the My computer Window and right click on the drive in which you want to install the new program. For this, click on the Start Orb, placed on the bottom left corner of the home screen. From the Start menu pop, click on the label that reads My Computer. This will launch the My Computer window. Now, right click the drive in which you want to install the software. From the right click dropdown, select the label that reads Properties. This will launch the Properties tab.

·         From the properties window, select the security tab. Scroll down the security tab and select one of the two options from the Security tab. If you are using Windows 2000 machine, make sure that the Name box has the System user account installed for Windows 2000. If you are using Windows XP, make sure the Group/user names box has the System user account included.

·         If your System account does not appear, click on the option Add. This will make the Select users or Groups option to display. Choose the label System in the name filed and then hit the Add option. Once done with naming, hit the OK button.

·         Go to the Permissions fields. Place a tick mark in the box next to the label that reads Full Control and select the Advanced label. Place a tick mark next to the label that reads Replace permission entries on all child objects ...child objects. Place a tick mark next to the label that reads System Account and hit the OK button.

Follow the above measures to fix windows Installer Error 1603. For more assistance on fixing Microsoft problems, contact our help desk.